• Accueil
  • Testeur d'impédance de transformateur portable Testeur d'impédance de court-circuit

Testeur d'impédance de transformateur portable Testeur d'impédance de court-circuit

Description succincte :

ITEM: RUN-LVSCI800

It tests the short-circuit impedance (%) of power voltage on site and compares it with the value indicated on the nameplate or the factory default to find out any defects including but not limited to winding displacement or deformation due to currents from major failure during transformation, installation or operation following the delivery test.

Détail du produit

Étiquettes du produit

China Supplier Transformer Short-Circuit Impedance Tester with Good After Service

Transformer LV Short-circuit Impedance Tester applies to LV load impedance test during delivery, overhaul, trial test and handover test of power transformers (single phase or three-phase).

Technical parameters about the Low Voltage Short Circuit Impedance Test

Nom du produit Transformer short circuit impedance tester
Scope of voltage measurement 5~400V
Scope of current measurement 0.1~20A
Fréquence d'alimentation 50Hz
Précision de la mesure 0.2d
Température de fonctionnement -10℃~50℃
Humidité relative ≤85%RH, NON-CONDENSING
Alimentation électrique AC220V±10%
Scope of voltage measurement 5~400V
Scope of current measurement 0.1~20A
Fréquence d'alimentation 50Hz
Précision de la mesure 0.2d
Alimentation électrique AC220V±10%
Température de fonctionnement -10℃~50℃
Humidité relative ≤85%RH
Net Weight 6kg

LV Short circuit Impedance Tester features

1.The tester is supplied with AC220V low voltage power to provide current for AB, BC and CA high voltage windings of the transformer automatically; collects data simultaneously and; calculates impedance error percentage automatically with intuitive testing results;

2.The tester completes the three-phase testing automatically in the primary connection mode other then inversed connection with the testing wire;

3.The tester allows either single phase testing or three-phase testing both manually and automatically;

4.The tester achieves output current limit applicable to test item with any impedance;

5.The test item can be measured without an external voltage regulator;

6.The tester functions in measuring zero sequence impedance;

7.The tester functions in measuring inductance;

8.The tester has a large LCD display with a menu in Chinese. Operation are facilitated based on the notes on the display;

9.The tester enables printing and storage and is featured with high testing accuracy, high automation, small in size and light weight.

 

Laissez votre message