Testeur de transformateur triphasé TTR (Turns Ratio)

Description succincte :

ITEM : RUN-TT10A Le test de rapport permet de s'assurer que les enroulements du transformateur ont le nombre de tours adéquat pour produire les tensions requises. Le rapport est une mesure de la tension appliquée aux bornes du primaire par rapport à la tension appliquée aux bornes du secondaire. tension mesurée aux bornes du secondaire. 3 phase transformer turn ratio tester is used to conduct turns ratio or voltage ratio test in Current or Voltage transformer. It finishes test of three-phase voltage ratio or turns ratio once, fast testing and high precise. Advantege : 1. Il dispose d'un point neutre ; 2. Peut être connecté avec bluetooth et contrôlé par un téléphone portable. Service : The instrument will be repaired and replaced free of charge for product quality problems within one year from the date of purchase, and will provide lifetime warranty and technical services. If you find any abnormalities or malfunctions in the instrument, please contact the company in time to arrange the most convenient solution for you.

Envoyez-nous un courriel

Détail du produit

Étiquettes du produit

Testeur automatique de rapport de tension et de rapport de courant de transformateur Équipement de test TTR triphasé

The ratio test ensures that the transformer windings have the proper turns to produce the voltages required. The ratio is a measure of the voltage applied to the primary terminals to the voltage measured at the secondary terminals. 3 phase Équipement d'essai TTR is used to conduct turns ratio or voltage ratio test in Current or Voltage transformer. It finishes test of three-phase voltage ratio or turns ratio once, fast testing and high precise.

Vidéo du testeur de rapport de transformation, l'ingénieur vous montre comment utiliser cet équipement de test de rapport : (https://youtu.be/sEjt5IyhNb8) [embed]https://youtu.be/sEjt5IyhNb8[/embed]

Ⅰ : Paramètres techniques de ce testeur TTR :

1	Plage de test	ratio	0.9～10000
1	Plage de test	angle	0-360°
2	Précision	±0,1%+2 chiffres	0.9-500
		±0,2%+2 chiffres	501-2000
		±0,5%+2 chiffres	2001-10000
3	Précision de l'angle		±0.2°
4	Tension de sortie	Ajustement automatique en fonction de la charge
5	Meilleure résolution	ratio	0.0001
5	Meilleure résolution	angle	0.01°
6	Puissance d'entrée	AC220V±10% 50±1Hz
7	Plage de température	-10℃～40℃
8	Humidité relative	0 à 90% sans condensation
9	Dimension	Boîte à instruments 360290170(mm)	Mallette d'accessoires 360290170(mm)
10	Poids	Instrument 5 KG	Mallette d'accessoires 5,5 KG

Voir notre Testeur de rapport de rotation Catalogue pour plus d'informations.

Ⅱ : Caractéristiques du testeur de rapport des tours du transformateur :

1. The coaxial precision inverter power supply is used inside the instrument, which eliminates the influence of harmonics of the mains voltage during the measurement, and the measurement is more accurate. When the working power source is a generator, there is no influence. 2. The three-phase output voltage is adopted to improve the test speed. The angle between phases can be measured, and the wiring group 0-11 can be automatically identified. For low-voltage rectifier transformers with multiple windings, the low-voltage side does not need to be disconnected to measure the transformation ratio and 7.5 ° Angle deviation. 3. It is suitable for a wide variety of transformers, especially suitable for the measurement of Z-type transformers, rectifier transformers, grounding transformers, electric furnace transformers, phase-shifting transformers, balance transformers, etc. 4. With high and low voltage reverse connection protection, transformer turn-to-turn short-circuit protection, tap switch failure protection, output full short-circuit protection, and increase the stability of the instrument. 5. After inputting the rated parameters, it can automatically measure the transformer ratio, error value and tap position of the tap changer. Especially for tap changers with asymmetric tapping, the accurate position of the tap changer of the transformer can also be accurately measured. A tap switches capable of measuring 99 tap positions. 6. Adopt 7-inch high-definition color touch screen LCD, modular display, clear display even under strong light. 7. The instrument not only has print output, U disk interface, but also RS232 interface, which is convenient for paperless office. 8. High quality multifunctional engineering plastic box is cold-resistance, high temperature resistance, water proof, shake proof, which is suitable for field test. 9. By downloading APP(Android), users can control instruments, store and upload test data for easy reference.