Dauerhaft billig hohe Empfindlichkeit tragbares Design kleine Größe Teilentladung Tester
Kurze Beschreibung:
Technische Parameter dieses Teilentladungsprüfers
System | WINCE6.0 |
CPU | Hauptfrequenz 533MHz |
Speicher und RAM | RAM 256MB DDR2， 1GB Nand Flash |
Anzeige | 4.3” TFT true color LCD touch screen，resolution 480 * 272 |
Hafen | SD memory card，USB，serial ports，headphone |
SD memory card | 8G and above TF card |
Kamera | 3 million pixel high-definition camera |
Ergänzend | GPS, Thermohygrometer, Laser-Stift mit hoher Helligkeit |
Speicherfunktion | GPS coordinate，time /date，temperature/humidity |
Frequenz | 20-150kHz |
| Sensor | 40kHz x 1Ea |
Betriebstemp. | -25℃ ~ 70℃ |
Relative Luftfeuchtigkeit | 0 - 95% |
Stromversorgung | input：100-240V， 50/60Hz output：Voltage 16.8V，Current 1A |
Batterie | Battery：Lithium battery Operating hours：~ 8 hrs Battery protection：LCD backlight turns off when there is no operation within 5 minutes。When the battery power is less than 5%, the system will beep to prompt to save the data in time, and the user needs to shut down and charge. |
Siehe Teilentladungsprüfgerät Katalog für mehr Infos!!
Merkmal des Prüfgeräts:
1.Portable design, small size, light weight, 2.Accurate position and easy focus on faulty equipment through camera and laser detector. 3.Color touch screen, display waveform, dB value, temperature, humidity, GPS. 4. Convert the abnormal ultrasonic signal detected by the detector into audible sound signal and waveform output 5.The embedded GPS receiver automatically stores the coordinate data, which is convenient for querying and saving the detection path 6.Backstage data management software can realize data statistics and generate report. 7.High sensitivity, accurate position cable fault. 8.Free from noisy environment. 9.30 meters non-contact live detection distance, safe and reliable.