Berita Industri
-
Beberapa pengetahuan profesional mengenai SFRA
Baca lebih lanjutSFRA stands for Sweep Frequency Response Analysis, and it’s a diagnostic technique used primarily for testing the condition of transformers and other electrical equipment, such as shunt reactors, generators, and bushings. SFRA is used to detect mechanical deformations, winding movement, core displacements, and other potential faults that could affect the performance and safety of power […]
-
Untuk apa tester minyak BDV digunakan? Dan bagaimana cara menggunakannya?
Baca lebih lanjutwhat’s the oil bdv tester is uesd for? An oil BDV (Breakdown Voltage) tester is used to measure the dielectric strength of insulating oils, typically in transformers and other electrical equipment. It determines how well the oil can withstand electrical stress without breaking down. A higher breakdown voltage indicates better insulating properties, which is crucial […]
-
Perbandingan dengan dua penguji nisbah lilitan trafo
Baca lebih lanjutThe following are tuo transformer turns ratio tester: Both have battery inside, so don’t worry about fieled testing. Ⅱ: Specification of the Transformer ratio test : Desk Type: 1 Test Range ratio 0.9～10000 angle 0-360° 2 Accuracy ±0.1%+2 digit 0.9-500 ±0.2%+2 digit 501-2000 ±0.5%+2 digit 2001-10000 3 Angle Accuracy ±0.2° 4 Output Voltage Automatically adjust according […]
-
Apakah DC hipot tester?
Baca lebih lanjutWHAT IS DC HIPOT TESTER ? For medium to high voltage rotating equipment, DC Hipot tests called Step Voltage or Ramp tests are used to see if the start of an insulation breakdown can be detected as the voltage is raised. If a breakdown is starting the test can be terminated before there is an […]