20A Leistungsschalter-Prüfgerät Schalter-Timing-Tester
This is 20A circuit breaker analyzer, our engineer will show you how to operate this test equipment:
High Voltage Circuit Breaker Dynamic Characteristic Tester be used for measure the mechanical dynamic characteristic parameters of low oil, vacuum, SF6 and other high-voltage circuit breakers.
Siehe unser Stromkreisunterbrecher-Analysator Katalog für weitere Informationen
Ⅰ: Technical Parameters of this circuit breaker tester:
|
Artikel
|
Parameters
|
Genauigkeit
|
|
Stromversorgung
|
110V/60Hz
|
|
|
Air pressure
|
86 ~ 106 KPA
|
|
|
Temperatur
|
－10～40℃
|
|
|
Relative Luftfeuchtigkeit
|
≦80%RH, non-condensing
|
|
|
Insulation Resistance
|
＞2MΩ
|
|
|
Dielectric strength
|
1.5KV withstand voltage to chassis for 1 minute,
no flashover and arcing |
|
|
Timing
|
Range:250-4000ms, resolution: 0.1ms
Range:10000-20000ms, resolution: 1ms |
0.1ms±1 digit
1m± 1 digit |
|
Speed
|
Range: 20.00m/s, resolution: 0.001m/s
|
±0.01m/s±1 digit
|
|
Aktuell
|
Range: 20A, Resolution: 0.01A
|
1% ±0.1A
|
|
Output Power
|
DC5 – 270V digital adjustable 20A(instant)
|
Ⅱ: Features about the Circuit Breaker Analysis Test Equipment:
1. Measure the inherent opening and closing time of 12-way metal fracture, time tolerance in same phase, time tolerance in different phase,close-open time and no flow time in process of close-open, open-close, open-close-open, closing bounce time,Some models can measure the pre-cast time of the closing resistance.
2. Record and measure the closing bounce time, bounce times, bounce process, and bounce waveform of each fracture.
3. Record and measure opening/closing speed, maximum speed, average speed, overall limit, clearance, overtravel limit switch,rebound amplitude, time-travel characteristic curve.
4. Record the opening/closing current value and current waveform of the opening/closing coil, and provides DC5-270V/10A (20A) digital adjustable circuit breaker operation power supply, automatically completes the low voltage test of the circuit breaker, and measures the operating voltage value of the device.
5. Simultaneously measure 6-way closing resistance value and its pre-casting time in some models.
Ⅲ: Detailed pictures of this circuit breaker Dynamic Characteristics Tester:
Ⅳ: Service für die elektrischen Prüfgeräte von Run Test:
Das Gerät wird bei Problemen mit der Produktqualität innerhalb eines Jahres ab dem Kaufdatum kostenlos repariert oder ersetzt und bietet lebenslange Garantie und technischen Service.
Sollten Sie Anomalien oder Funktionsstörungen an dem Gerät feststellen, wenden Sie sich bitte rechtzeitig an das Unternehmen, um die für Sie günstigste Lösung zu finden.