Umgangatho oPhezulu oSebenzayo oSebenzayo ngokuSebenzisayo uGuquguquli lwangoku olunokubakho uMguquli we-CT PT weempawu zoMhlalutyi

Inkcazelo emfutshane:

into: RUN-CTPT1002

Esi sixhobo samkela i-DSP ephezulu kunye ne-ARM, iteknoloji yokuvelisa i-teknoloji ephezulu, eqinisekisa ukusebenza kwemveliso ezinzileyo kunye nethembekileyo, imisebenzi epheleleyo, iqondo eliphezulu lokuzenzekelayo, ukuvavanya okuphezulu, kunye nezinga eliphezulu e-China. Sisixhobo sovavanyo lobuchwephesha kubaguquli bamandla kwishishini lamandla.


Iinkcukacha zeMveliso

Iithegi zeMveliso

UkuSebenza okuPhezulu okuSebenzayo okuSebenzayo okuSebenzayo okuGuquguqukayo kwangoku uGuqulo lwangoku lwe-CT Umhlalutyi we-CT/PT uMvavanyi

detail-(2)
detail-(1)

IiParameters ze-PT CT Analyzer ePhathekileyo ePhakamileyo

Ukusetyenziswa CT, Electromagnetic PT
Isiphumo 0 ~ 180Vrms, 12Arms, 36A (Incopho)
Ukuchaneka komlinganiselo wombane ±0.1%
 

CT ujiko lomlinganiselo womlinganiselo

Uluhlu 1-40000
Ukuchaneka ±0.1%
PT ujiko lomlinganiselo womlinganiselo Uluhlu 1-40000
Ukuchaneka ±0.1%
Umlinganiselo weSigaba Ukuchaneka ±2min
Isigqibo 0.5min
Umlinganiselo wokuxhathisa ukujikajika kwesibini Uluhlu 0~300Ω
Ukuchaneka 0.1% ±2mΩ
Umlinganiselo womthwalo we-AC Uluhlu 0 ~ 1000VA
Ukuchaneka 0.1%±0.02VA
Igalelo lombane AC220V±10%,50Hz
Okusingqongileyo Ubushushu bokusebenza: -10oC ~ 50oC,

Ukufuma okunxulumeneyo: ≤90%

Ubungakanani kunye nobunzima 340 mm×300 mm×140mm, <7kg

Iimpawu zeSixhobo soVavanyo lweTransformer yangoku-Ephathekayo CT/PT Tester

I-1.Imisebenzi ebanzi, engahambelani kuphela neempawu zokuvuselela (okt iimpawu ze-volt-ampere), umlinganiselo wokuguqulwa, i-polarity, ukuxhatshazwa kwesibini, umthwalo wesibini, umahluko womlinganiselo kunye nokwahlukana kwe-angular yee-CTs ezahlukeneyo (njengokukhusela, ukulinganisa, i-TP) ingasetyenziselwa ukuvavanya iimpawu zokuvuselela, umlinganiselo wokuguqulwa, i-polarity, kunye nokumelana nokunyuka kwesibini kweeyunithi ezahlukeneyo zombane we-PT.

I-2.I-Inflection point voltage/current, 10% (5%) ijika lempazamo, i-acuracy limit factor (ALF), isixhobo sokhuseleko (FS), ixesha lesibini elingatshintshiyo (Ts), i-remanence factor (Kr), i-saturation inductance, njl. inikwe ngokuzenzekelayo i-CT ne-PT iiparamitha.

3. Ukuthobela imigangatho eyahlukeneyo ye-transformer efana ne-IEC 60044-1, i-IEC 60044-6, ikhetha ngokuzenzekelayo ukuba yeyiphi imigangatho yokuvavanya ngokohlobo kunye nenqanaba le-transformer.

I-4.Ngokusekelwe kumgaqo-nkqubo wokuvavanya indlela ephantsi ye-low-frequency, inokumelana neemvavanyo ze-CT ezinamanqaku e-inflection aphezulu njenge-40KV.

5. Yamkela indlela yamazwe ngamazwe ethandwayo yesikwere yamaza.

6.Ugcino lweData ukuya kuthi ga kwiseti yamawaka alikhulu, akukho kulahleka xa umbane ucinyiwe. Yenza ingxelo ye-Excel ngqo emva kokuba uvavanyo lugqityiwe.

7.Uvavanyo lulula kwaye lufanelekile. Ukuchasana ngokuthe ngqo, ukuvuselela, umlinganiselo wokuguqulwa kunye novavanyo lwe-polarity lwe-CT lunokugqitywa ngokushicilela omnye. zonke ezinye iimvavanyo ze-CT zisebenzisa indlela yocingo efanayo ngaphandle kovavanyo lomthwalo.

8.Ephathekayo, kuphela 6 KG.


  • Ngaphambili:
  • Okulandelayo:

  • Shiya uMyalezo Wakho:

    Iindidi zeemveliso

    Shiya uMyalezo Wakho:

    Bhala umyalezo wakho apha kwaye uwuthumele kuthi.