5KV AC 6KV DC Hipot Tester Insulation Resistance Tester
Motlakase Compliance Analyzer Programmable AC DC Withstanding Voltage Hipot Tester
Sesebelisoa se sebelisa thekenoloji ea linear amplification ho hlahisa tlhahiso e fokolang ea sine wave wave, e etsang hore tlhahlobo e nepahale haholoanyane. Tšebeliso ea skrine ea LCD ea litlhaku tse kholo ea 16×2 le mokhoa oa ho sebelisana o bonolo ho mosebedisi o etsa hore e hlake le ho ba bonolo hore basebelisi ba e utloisise. Liphetho tsa liteko le maemo a liteko li hlahisoa ka nako e le 'ngoe, e leng se etsang hore basebelisi ba ikutloe ba phutholohile ka liqeto tsa tlhahlobo.
Litekanyetso tsa tekheniki tsa Hipot Tester
|
AC E mamella Teko ea Voltage |
Matla a tsoang | Range: 0-5000V, 0-12mA, qeto 10V |
| Ho nepahala: ± (2% sete boleng + 5V) | ||
| Nako ea tlhahiso | 50Hz/60Hz e ka khethoang | |
| Sephetho sa waveform | Sine wave, distortion degree <2% | |
| Ho beha moeli oa holimo | Range: 0.10-12.00mA, qeto 0.01mA Ho nepahala: ± (2% sete boleng + mantsoe a 2) |
|
| Litlhophiso tse tlase tsa moeli | Range: 0.00-12.00mA, qeto 0.01mA Ho nepahala: ± (2% sete boleng + mantsoe a 2) |
|
| Ho fumanoa ha arc | Mohato oa 1-9 | |
|
DC E mamella Teko ea Voltage |
Matla a tsoang | Range: 0-6000V, qeto: 10V, ho nepahala: ± (2% sete boleng + 5V) |
| Sephetho se ripple | <5% (6KV / 5mA) e lekoa tlas'a mojaro oa mohala | |
| Ho beha moeli oa holimo | Range: 0.02-5.00mA, qeto: 0.01mA Ho nepahala: ± (2% sete boleng + mantsoe a 2) | |
| Litlhophiso tse tlase tsa moeli | Range: 0.00-5.00mA, qeto 0.01mA Ho nepahala: ± (2% sete boleng + mantsoe a 2) | |
| Phallo e iketsang | 200mS | |
|
Sehokelo sa taolo |
Kenyelletso: teko (TEST), seta bocha (RESET) Sephetho: Teko e fetile (PASS), teko e hlotsoe (FAIL) Teko e ntse e tsoela pele (TEST-IN-PROCESS) |
|
|
Ho beha butle butle |
0.1-999.9 metsotsoana | |
|
Nako ea teko |
Range: 0.5-999.9 metsotsoana (0 = teko e tsoelang pele) | |
|
Mokhoa oa tlhahiso ea sephetho sa liteko |
Buzzer, LCD e bonts'a ho bala, ho laola boemo ba sebopeho | |
|
Sehlopha sa memori |
Lihlopha tse 5 tsa maemo a teko li tšoaroa ka hlooho, sehlopha ka seng se na le mehato e 3 ea tlhahlobo eo u ka e khethang | |
|
Hlokomela |
Pontšo ea 16 × 2 LCD e nang le mabone a morao | |
|
Teko ea ho hanyetsa Insulation |
Matla a tsoang | Range: DC100-1000V, qeto 10V Ho nepahala: ± (2% sete boleng + 5V) |
| Boemo ba ho hanyetsa | Range: DC100-1000V, qeto 10V Ho nepahala: ± (3% beha boleng + mantsoe a 2) voltage ≥ 500V ± (7% ho beha boleng + mantsoe a 2) voltage (500V). |
|
| Ho beha moeli oa holimo | Mofuta o tšoanang oa ho hanyetsa, sebaka sa 1MΩ | |
| Sebaka se tlase sa moeli se behiloeng | Mofuta o tšoanang oa ho hanyetsa, sebaka sa 1MΩ | |
Lintlha tse mabapi le AC DC ena e mamellang Voltage Hipot Tester
1. 16×2 tlhaku e khōlō LCD pontšo
2. Linear, tlase khopameng sine wave tlhahiso
3. Dihlopha tse 5 tsa ho seta lenaneo le tshebetso ya memori
4. Ts'ebetso ea ho seta ramp ea motlakase
5. Mosebetsi o ikhethang oa ho lemoha li-arc, ho khetholla sekoli ho nepahetse haholoanyane
6. AC le DC li mamella ts'ebetso ea tlhahlobo ea voltage / insulation
Lintlha tse latelang ke litšoantšo tsa 'nete tsa sehlahisoa le litšoantšo tsa ho paka bakeng sa Analyzer ena ea Programmable standstand
